The most powerful video transmitter on the market just got a "bigger" brother. It can be connected directly to up to a 6S battery and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand new active output power monitor, we ensure that you'll always meet the race requirements, while giving you the best possible picture. 

At only 7g and a 31x22x6mm form factor, your quad will barely notice it's there. The 25mW - 800mW adjustable output power allows you to race with friends and penetrate significant amounts of concrete with just a few pushes of a button. The 40CH coverage gives you the freedom to fly at any race without having to resort to video transmitter swapping practices (*).

SMARTAUDIO - FULL CONTROL

SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup emergency frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!

CLEANSWITCH - NEIGHBOR FRIENDLY

CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)

PITMODE - MADE TO RACE

Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with Clean Switch you can power on as soon as your channel is available without interrupting any of the active channels. 

SAY NO! TO DIPSWITCHES

Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. 

SPECIFICATIONS

• Operating Voltage: 2S - 6S
• Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*)
• Supply current: up to 600mA
• Weight: 7g (with SMA, without antenna)
• Operating Temperature: watch for normal airflow
• Audio carrier Frequency: 6.5 MHz
• Video Input Impedance: 75 Ohm
• Input Connector: JST GH 7pin (after July 2018)
• Antenna Connector: SMA Female Socket with screw mounting holes
• Video Format: NTSC/PAL

INCLUDED

• TBS UNIFY PRO 5G8 HV Video transmitter
• Video Transmitter / Camera / Power cable

DOWNLOADS

• TBS UNIFY Pro Manual
• TBS UNIFY Pro Manual (German)
• TBS SmartAudio specifications

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.

With the TBS UNIFY PRO32 Nano we have boosted the output power, improved the strength, decreased the power consumption, added capability for insane features and perfected the way it is installed in your multirotor. In a nutshell, it’s the most comprehensive, future proof, highest quality and overall best nano VTx ever made.

MAIN FEATURES

• Smallest, lightest video transmitter on the market
• Up to 500mw+ of output power
• Ultra-clean transmission (up to 16 pilots at once!)
• Barcodes reading
• Easy OSD, FC and RC channel changes, with fallback button menu
• PitMode - power up your quad during a race. Now with team-race capability!
• Clean powerup and video switching
• Robust RF amplifier allows powering up without antenna for hours!
• CE certified

SMARTAUDIO V2.1 & CRSF - TEAM RACE READY

SmartAudio technology provides UART control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. Betaflight OSD, TBS CORE PRO).

With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!

PITMODE - MADE TO RACE

Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's) to allow you to power up your quad and still see the image! You've got less than one meter of range to put your quad through its paces before placing it on that starting grid. Using SmartAudio or CRSF, you can power up the VTx using your remote!

BARCODES? BARCODES!! (PATENT PENDING)

The VTx is capable of processing the camera image. So we taught it to read barcodes! This means the VTx no longer needs to be transmitting to set channels, and setting channels can be done in the pits. It also means no more guesswork what channel the VTx is on, simply point it at the barcode of your choice and it will move to that channel or power level! There are many more exciting features coming with this technology, stay tuned and barcode on!

CLEANSWITCH - NEIGHBOR FRIENDLY

CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly.

SPECIFICATIONS

• Operating Voltage: 3-13V
• Output Power: 14dBm (25mW), 20dBm (100mW), 26dBm (400mW), 28dBm (500+mw)
• Operating Temperature: watch for normal airflow
• Video Input Impedance: 75 Ohm
• Antenna Connector: u.FL socket
• Video Format: NTSC/PAL
• Dimensions: 15 x 13 x 2mm
• Weight: 1g

INCLUDED

• 1x TBS UNIFY PRO32 5G8 Video transmitter
• 1x Silicone cable set (pre-tinned)
• 1x Linear whip antenna
• 1x Shrink Tube

DOWNLOADS

• TBS UNIFY Pro32 Manual
• TBS UNIFY Pro32 Manual (German)
• Declaration of Conformity

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.

The V3 version has all the function of V2 board, also add the following 2 additional function.

• 3 full UARTs (UART1, UART2 and UART6) are available in the V3 version. Pilots could use one UART for DJI digital FPV unit or Caddx Vista digital FPV unit and the other UART for external receiver like TBS Crossfire.
• Add 8M Flash chip for Betaflight Black Box.

The V2 board only have one full UART and could not support DJI digital FPV VTX.

For a new generation of toothpick drone，this new AIO Brushless FC can handle 20A continuous current(25A burst), which is the first 20A All-in-one FC on the market. Compared to FC / ESC Stacks design, this board provided with massive levels of performance capability while still maintain ultralight only 6.63g. Breaking through the limit of toothpick power, exploring more possibilities in 3''-4'' drones. This board is your best choice to DIY your own toothpick drone that is tailored to your requirements.

Here is a video of detailed introduction for 20A AIO FC, made by Jon E5 FPV.

BULLET POINT

• This new board can handle 20A continuous current(25A burst), which is the first 20A All-in-one FC on the market
• Compatible with 120X, 130X, 140X motors, and 1505 motors
• Comes with 4*Motor Pluggable Pins and Not Pre-solder in default, fits your needs of self-assembly best
• All of the solder pads are at the edge of FC, which is a convenience to solder
• USB port is mounted on the side, you have more possibilities of mounting it while still maintaining access to the USB port
• Integrated with a Betaflight MATEKF411 processor FC, Betaflight  OSD, F4 MCU, and 20A ESC, support 2-4S battery
• Double-sided motor solder pad. Pins pad and wires pad are both built-in for motors connection

PARTS UPDATED

• Integrated 24 single N-channel MosFETs chips on 20A AIO FC board, which has a lower inner resistance. 12A AIO FC board adopts 12 dual MosFETs chips instead. Current sensor included.
  

SPECIFICATIONS OF FC

• Firmware version: Betaflight MATEKF411 (MK41)
• CPU: STM32F411CEU6 (100MHZ)
• OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
• Six-Axis: MPU6000 (SPI connection)
• Size: 32.5*32.5mm (26.5mm mounting holes)
• Support programmable LED like WS2812 etc
• Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver
• Built-in current sensor
• Weight: 6.63g

SPECIFICATIONS OF ESC

• Support BLheli/BLHELI_S suite Pass-through ready
• Input voltage: 2S-4S Lipo
• Continuous current: 20A
• Peak current: 25A
• Motor Connectors: 1.25mm header pins connector
• Firmware: BLHELI_S
• Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

DIAGRAM FOR Toothpick F4 20A AIO FC V2  

DIAGRAM FOR Toothpick F4 20A AIO FC V3

PACKAGE

• 1 * Toothpick F4 20A AIO 2-4S brushless flight controller
• 1 * Cable Pigtail (XT30)
• 4 * M2 nuts 
• 4 * M2x10mm screws
• 4 * Anti-vibration rubber dampers
• 4 * Motor Pluggable Pins

The next revolution in circular polarization technology, the Triumph Pro gives professional performance in a compact, durable package.  Don’t let the small size fool you, the Triumph Pro doesn’t compromise on performance.  Designed by IBCrazy and manufactured by TBS, the multi-phase elements use patent pending technology to create a precise circular pattern that is not distorted by proximity to your aircraft or other objects.

The microstrip antenna design together with a rigid and ultrasonic-welded enclosure allow mounting in exposed places, where signal propagates better. The antenna comes in 4 connector flavors: u.FL, MMCX, MMCX 90º and SMA.

FEATURES:

• Best in class range and signal quality
• Manufactured and tested to highest standards
• Ultrasonic welded and foam infused cover for ultimate crash-protection
• Incredibly small and low weight
• Double-jacket semi-rigid cable for heavy impact resistance

TECHNICAL SPECIFICATIONS:

• Frequency range: 5500-6000MHz
• Gain: 1.6dbic
• Polarization: RHCP
• Weight: 11.5g
• Height: 78mm, 3in
• Axial Ratio:   0.99
• Connector: SMA

PACKAGE CONTENTS:

• 1x TBS Triumph Pro SMA

The next revolution in circular polarization technology, the Triumph Pro gives professional performance in a compact, durable package. Designed by IBCrazy and manufactured by TBS, the multi-phase elements use patent pending technology to create a precise circular pattern that is not distorted by proximity to your aircraft or other objects.

The microstrip antenna design together with a rigid and ultrasonic-welded enclosure allow mounting in exposed places, where signal propagates better. The antenna comes in 4 connector flavors: u.FL, MMCX, MMCX 90º and SMA.

FEATURES:

• Manufactured and tested to highest standards
• Incredibly small and low weight
• Best in class range and signal quality
• Double-jacket semi-rigid cable for heavy impact resistance
• Ultrasonic welded and foam infused cover for ultimate crash-protection

TECHNICAL SPECIFICATIONS:

• Frequency range: 5500-6000MHz
• Gain: 1.6dbic
• Polarization: RHCP
• Weight: 4.4g
• Height: 24mm, 0.95in
• Axial Ratio:   0.99
• Connector: SMA Stubby

PACKAGE CONTENTS:

• 1x TBS Triumph Pro SMA Stubby

FPV’s favorite “patch killer” antenna has a new upgraded element. The patent pending vector-phasing technology of the Crosshair Xtreme gives both longer range and better signal clarity. Designed to be a long range/obstacle penetration antenna improvements include increased gain, beamwidth, and bandwidth.

Specifications

• Gain: 10.25dbic
• Polariztion: RHCP
• Bandwidth: 5300Mhz-6400MHz
• Axial ratio: 0.99 (measured)
• -3db point: +/- 30 degrees
• Flight beam: 120 degrees
• Weight: 16.6g (0.58oz)
• Dimensions: 7.2cm x 6.2cm x 2.1cm

Includes

• 1x Crosshair XTREME Antenna
• 1x 45 Degree SMA Adapter

PRODUCT DESCRIPTION

The Motor XING 2806.5 designed for bigger quads like 7-8 inch quad frames, which is with better efficiency in this range frames.The XING 2806.5 features uni-bell design and adopt Japan NSK bearing, N52H arc magnets. It offers incredible thrust number, highly responsive and extremely smooth flight characteristics. The bigger stator size 2806.5 allows it to provide instant power to save you from those crazy mountain dives last minute. It's a great motor if you're building bigger drones like 7 inch or 8 inch. 

Features:

• Unibell design
• High-strength 4mm Titanium alloy shaft
• Electromagnetically matched magnets and stator
• 7075 aluminum Bell and Base
• N52H Arc curve  magnets
• Japanese NSK 11*5*5 bearings 
• Hex bolt shaft set screw
• Motor wires protected 
• Dynamically balanced

Specification:

• Voltage: 2-6S
• No.of Cells(Lipo): 2-6S
• KV Option: 1300
• Stator Diameter: 28
• Stator Length: 6.5mm
• Shaft Diameter: M5
• Bearing: NSK/11*5*5
• Configuration: 12N14P
• Motor mount hole: 19*19 φ3mm
• Weight: 49.5g(with a short cable)

Package included:

• 1pc x X22806.5 motor
• 1pc x M5 Screw nut
• 4pc x m3*8 screws

The Motor XING 2814 designed for bigger quads like 9-10 inch quad frames, which is with better efficiency in this range frames. The XING 2814 features adopt Japan NSK bearing, N52H arc magnets. It offers incredible thrust number, highly responsive and extremely smooth flight characteristics. The bigger stator size of 2814 allows it to provide instant power to save you from those crazy mountain dives last minute. It's a great motor if you're building bigger drones like 9 inch or 10 inch. 

Features:

• 7075 aluminum Bell and Base
• Motor wires protected 
• Electromagnetically matched magnets and stator
• Hex bolt shaft set screw
• Dynamically balanced
• Japanese NSK 11*5*5 bearings 
• N52H Arc curve  magnets

Specification:

• Voltage Range: 2-6S(for different KV, different power support, please refer to the Test Report to choose your suitable KV and batteries)
• KV Option: 1100KV
• No.of Cells(Lipo): 2-6S
• Stator Diameter: 28
• Stator Length: 14mm
• Shaft Diameter: 5mm
• Configuration: 12N14P
• Bearing: NSK/11*5*5
• Motor mount hole: 19*19 φ3mm
• Weight: 88.3g(with a short cable)

Package included:

• 1pc x X2814 motor
• 1pc x M5 Screw nut
• 4pc x M3*8 screws