THE EXTENDED TBS IMMORTAL T V2 ANTENNA!

With improved signal sensitivity and durability, the extended Immortal T antenna is the perfect companion for long range pilots.

The center housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize damage from crashes.  The spring steel element still carries the same immortality from V1 which will protect itself from prop strikes and incorrect mounting. Further tuning on the center element provides better coverage and range. The extended version has a 120mm long cable, ideal for larger aircraft like the TBS Caipirinha 2, or for long range rigs which require additional clearance!

SPECIFICATIONS

• Weight: 3.7g
• Width: 15cm
• Connector: u.FL / IPX
• Cable length: 120mm

THE TBS IMMORTAL T V2 ANTENNA!

With improved signal sensitivity and durability, the Immortal T v2 antenna is the perfect companion for race quads.

The center housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize damage from crashes.  The spring steel element still carries the same immortality from V1 which will protect itself from prop strikes and incorrect mounting. Further tuning on the center element provides better coverage and range. 

• Weight: 3.4g
• Width: 15cm
• Connector: u.FL / IPX
• Cable length: ~80mm

THE CROSSFIRE TX ANTENNA TO RULE THEM ALL!

Antenna orientation, wear & tear and non-directionality have been the source of some range issues with our long range and miniquad pilots. We therefore sat down with IBCrazy and he designed this antenna to be as durable as possible. A diamond lasts forever!

MORE RANGE

With a slight directionality to give you more range when flying in front of you, but still maintain a solid link when flying behind you. The antenna uses the ground you are standing on to reflect and therefore boost your signal out beyond what traditional antennas can manage. 

SPECIFICATIONS:

• Gain: 2.88dB
• Frequency: 850 - 950MHz
• Connector: SMA Male
• Weight: 20.6g
• Size: 135 x 120 mm
• Suggested for: TBS Crossfire TX or TBS Crossfire Micro TX

Designed by and manufactured in cooperation with Video Aerial Systems, IBCrazy. 

The FrSky ultra mini receiver R-XSR is the evolution of the popular full range XSR receiver. The R-XSR is a standalone receiver with all the functionality of the full size XSR (including telemetry), but at 1/3 size and weight of XSR receiver. The R-XSR also has an integrated diversity with 2x antennas for a solid RC link, and the IPEX connector makes it convenient to replace antennas.

Features

• Support telemetry and Smart Port enabled
• Ultra mini size and light weight
• Supports redundancy function
• Full range
• IPEX connector, replaceable antennas
• Switchable SBUS/ CPPM signal output

Specifications

• Weight: 1.5g
• Dimension: 16*11*5.4mm (L*W*H)
• Operating Voltage Range: 4~10V
• Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
• Firmware Upgradable
• Compatibility: FrSky X Series modules and radios in D16 mode

Downloads

• Download the R-XSR Manual here.

ATTENTION!

UPDATE YOUR CROSSFIRE TRANSMITTER TO V2.88 OR ABOVE BEFORE BINDING!

TBS has redefined long range flying! With the TBS Crossfire Diversity Nano RX we have taken the most powerful Crossfire receiver. Presenting the smallest full-fledged diversity receiver of any frequency, even boasting a power-redundancy circuit (battery not included!)

TRUE DIVERSITY, FULL RANGE

The TBS CROSSFIRE Diversity Nano Receiver is a compact R/C receiver with 8ch outputs (PPM, SBUS, and CRSF capable), with best-in-industry noise-rejection and record-breaking range capability. It is the only receiver to provide a true dual-input stage, chip-based diversity, with the usual filtering and noise rejection from onboard video systems.

BEACON MODE

Ever lost a plane and spent hours looking for it? Enter the TBS CROSSFIRE beacon mode. The diversity nano receiver comes with a LiPo battery port where you can connect an optional backup port (1s). It will keep the receiver running for a full day after all onboard electronics are gone. It will be screaming for help by giving you its GPS coordinates, and also blasting out RF beacon signals that will allow you to pinpoint its location even if no GPS was ever on your airplane. The backup battery (1s) will also be charged as soon as you apply power to the rig. 

INCLUDES

• 1x TBS Crossfire Diversity Nano Receiver
• 2x TBS Crossfire Micro Receiver Antenna
• 14x 30awg silicon connection wires
• 1x Spare shrink tube

SPECIFICATIONS

• Weight: 1.8g (receiver only)
• Size: 24mm x 18mm
• Requires: Firmware V2.87

DOWNLOADS

• TBS Crossfire - RED Declaration of Conformity
• Quickstart Guide / Manual

TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case, the minimum!). The end result is a full range receiver, at the smallest size of any receiver in the industry (yes, it's smaller than the XM+). 

SPECIFICATIONS

• Weight: 0.5g (receiver only)
• Size: 11mm x 18mm
• Requires: Firmware V2.25

INCLUDES

• 1x TBS Crossfire Nano Receiver
• 1x TBS Crossfire Micro Receiver Antenna
• 1x Spare shrink tube
• 6x 30awg silicon connection wires (2 black, 2 red, 1 white, 1 yellow)
• 1 x pin header 1x4

DOWNLOADS

• TBS Crossfire - RED Declaration of Conformity
• Quickstart Guide / Manual

A NEW ERA OF CONNECTIVITY

The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diveristy, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link.

Remote control links, however, are tasked with much more than range. Latency, telemetry, robustness against interference, ease of use and the overall finish are too often sacrificed for that last bit of range. The Crossfire comes with plenty of range, and uses that margin for additional functionality and reliability. A bright future for FPV lies ahead!

TELEMETRY / CRSF

As a modern R/C link, it has telemetry built in. Two-way communication opens up new possibilities. From streaming MAVLink to you smart device (no Mavlink stream support for Crossfire Micro TX!), to updating your firmware, setting your video transmitter channel or adjusting flight control parameters such as PIDs. Adaptive bandwidth controls the speed of transmission or optimizes for ultimate range. CRSF is a proprietary TBS communication protocol between the Crossfire and R/C and Flight Control. It provides ultra-low latency with unbelievable bandwidth (3x faster, 6x more data than any comparable protocol!). With such tight integration, the TBS Crossfire is the logical choice for anyone flying Betaflight, KiSS or ArduPilot/Pixhawk platforms.

BOILED DOWN TO SIMPLICITY

The Crossfire Micro TX borrows the core technology from its larger brother, but is a JR-module transmitter simplified to the most sought-after features, at an incredible price! For people looking to do extreme long range flights beyond 15-20km, the Crossfire TX is still the way to go. For anyone looking to penetrate buildings, fly mini quads or just explore your surroundings a few kilometers away, the Micro TX is the perfect companion. It will still go out up to 40km, just like its bigger brother. But it costs less than half the price.  

DOWNLOADS

• TBS Crossfire Manual
• TBS Crossfire Manual (German)
• TBS Crossfire Micro TX Quickstart Guide
• TBS Agent X (for software updates)
• Latest OpenTX LUA Scripts for Crossfire

FEATURES:

• Long range, adaptive and robust remote control system for your aircraft
• Immune to on-board noise
• Self-healing & frequency hopping (DSSS, FHSS)
• Two-way communication link with real-time link vitals and telemetry
• RX beacon mode to recover your downed aircraft
• Adaptive bandwidth control and range optimization
• Low latency, 150Hz update rate (3x faster than typical RC links) control for perfect immersive feeling
• Super easy binding and configuration via built-in display of your R/C
• 8 or 12ch output via SBUS/PPM/CRSF on both receivers
• Two receiver models: 8 port Diversity Rx, 4 port Mini-receiver (4g weight!)
• Selectable RF power from 25mW to 250mW (local restrictions apply)
• Ability to fly with multiple friends at the same time (10 or more)
• Micro-receiver for smaller drones. Smaller than you think!
• Transmitter LED shows link health
• Software updates via RF Link

TECHNICAL SPECIFICATIONS:

• Input Voltage: 3.5 - 13V
• Power consumption: 1.1W (@10mW) - 2W (@100mW)
• Dimensions: 65 x 48 x 22 mm (JR module size)
• Weight: 48g
• Frequency Bands: 868MHz (EU, Russia) / 915MHz (USA, Asia, Australia)

PACKAGE INCLUDES

• TBS Crossfire Micro Transmitter (JR module)
• TBS Crossfire Stock Tx Antenna V2

A NEW ERA OF CONNECTIVITY

The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diveristy, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link.

Remote control links, however, are tasked with much more than range. Latency, telemetry, strength against interference, connectivity with smart devices, ease of use and the overall finish are too often sacrificed for that last bit of range. The Crossfire comes with plenty of range, and uses that margin for additional functionality and reliability. A bright future for FPV lies ahead!

DEVELOPED BY EXPERTS

Team BlackSheep has been notorious for long range records, close-to-ground proximity flying in the Alps and deep urban operations. During our numerous missions all around the globe we have gathered a list of requirements, and have found that no existing system can cover them all. So we set on a long and painful path to develop a RC link system entirely from scratch, put it through its paces for over a year to ensure top-notch reliability and state-of-the-art functionality.

Through the OLED Display on the transmitter, you can monitor the real-time location of your drone (TBS GPS or BlackBox with DJI Naza or APM-based GPS required).  The up and downlink status provide a feeling of safety, the configuration options through the OLED display do away with any PC-based configuration tools. The pulsing LED relays your link budget and link health in colorized form (green = keep going, orange = turn around). In case of a crash, the location of the drone is visible on the OLED as well. The built in battery on the receiver turns it into a beacon automatically - and it will continue to transmit its last known location until the battery runs out. 

TELEMETRY / CRSF

As a modern R/C link, it has telemetry built in. Two way communication opens up new possibilities. From streaming MAVLink to you smart device, to updating your firmware, setting your video transmitter channel or adjusting flight control parameters such as PIDs. Adaptive bandwidth controls the speed of transmission or optimizes for ultimate range. CRSF is a proprietary TBS communication protocol between the Crossfire and R/C and Flight Control. It provides ultra-low latency with incredible bandwidth (3x faster, 6x more data than any comparable protocol!). With such tight integration, the TBS Crossfire is the logical choice for anyone flying Betaflight, KiSS or ArduPilot/Pixhawk platforms. 

DOWNLOADS

• TBS Crossfire Manual
• TBS Crossfire Manual (German)
• TBS Agent X (for software updates)
• Latest OpenTX LUA Scripts for Crossfire

FEATURES:

• Long range, adaptive and robust remote control system for your aircraft
• Immune to on-board noise
• Two-way communication link with real-time link vitals and telemetry
• Adaptive bandwidth control and range optimization
• Self-healing & frequency hopping (DSSS, FHSS)
• RX beacon mode to recover your downed aircraft
• Serial Modem capable of transmitting MAVLink or other serial protocols (up & downlink)
• Low latency, 150Hz update rate (3x faster than typical RC links) control for perfect immersive feeling
• Super easy binding and configuration via built-in display
• 8 or 12ch output via PPM/SBUS/CRSF on both receivers
• Two receiver models: 8ch Diversity Rx, 4ch PPM/SBUS Mini-receiver (4g weight!)
• Selectable RF power from 10mW to 2W (local restrictions apply)
• Ability to fly with multiple friends at the same time (10 or more)
• Transmitter LED shows link health, OLED display for built in configuration
• Dedicated head-tracking input option for full FPV immersion
• Fully configurable by OpenTX and TBS TANGO remote using CRSF protocol
• Short-Range mobile connectivity telemetry output for smartphone apps
•  Expansion port for future feature support
• CRSF protocol interface to Betaflight, Kiss and Raceflight FCs ( lower latency, higher update rate, telemetry support ) 
• Software updates via RF Link
• Micro-receiver for smaller drones. Smaller than you think!

TECHNICAL SPECIFICATIONS:

• Input Voltage: 3.5 - 13V
• Power consumption: 1.1W (@10mW) - 3.2W (@2000mW)
• Dimensions: 55 x 89 x 15 mm
• Weight: 76g
• Frequency Bands: 868MHz (EU, Russia) / 915MHz (USA, Asia, Australia)

PACKAGE INCLUDES

• TBS Crossfire Transmitter
• TBS Crossfire JR Adapter
• TBS Crossfire Stock Tx Antenna V2
• Crossfire Futaba cable
• Crossfire Graupner / Spektrum cable
• Crossfire PWM Pigtail
• Crossfire JST to XT30 cable

REDEFINING THE REMOTE CONTROL

Team Black Sheep has been at the forefront of perfecting the interface between FPV drone and mind. The TBS Tango 2 changes how radio remote controls will be from here on out! Despite being the smallest remote control available, it comes with full size hall gimbals, full-featured FreedomTX (temporary OpenTX fork), the lowest end-to-end latency of any remote and transmission system, unbreakable 3 & 2 position switches, open source operating system, built-in battery, USB-C charging, and so much more! It's not just a retouched game controller, it was designed from the ground up for R/C! The form factor and features make it the ideal take-anywhere, fly anytime remote control. 

CROSSFIRE INSIDE

The first radio with TBS Crossfire built in. This significantly lowers your cost, increases reliability and minimizes set up time. And the cherry on top are the LUA scripts being part of the familiar user interface. The antenna swivels out of the way, or doubles as a kick-stand when resting. TBS Cloud ready to go from the start. It all just makes sense. 

FEATURES

• Full size hall sensor gimbals
• Ergonomic and compact design with comfy rubber grips
• Ball-bearing
  
  • Configurable resistance and tension
  • Spare spring set included for lower tension
  • Foldable gimbal sticks (Pro only)
  • Adjustable throttle & pitch throw (+/- 10 degrees)
• Robust, streamlined switches
  
  • 2x 2-position switches
  • 2x 3-position switches
  • 2x momentary buttons
• TBS Crossfire built-in
  
  • CRSFShot for lowest latency and most direct response of any remote control available
  • Range of up to 30km / 20mi from the palm of your hand
  • Up to 12 channels supported
  • Swivel-antenna that doubles as a kick-stand
• Built-in 5000mAh 1S LiPo with USB-C 2A charging (2.5 hours for full charge)
• Open Source remote control operating system (FreedomTX, temporary fork of OpenTX)
• Speech audio output with audio jack & haptic vibration alert
• High resolution (128*96) black & white OLED screen w/ backlight
• Rocker dial and 3 button menu for super simple navigation
• 100+ model memory with included SD-card
• Digital rocker dial trim
• TBS Cloud compatible

TBS TANGO 2 PRO INCLUDES

• 1 x Tango 2 Pro
• 1 x Velvet Carry Bag with TBS Logo
• 1 x Springs Set (Lower Tension)
• 2 x Throttle limitation screws (with allen key)
• 1 x Sticker Sheet
• 1 x Tango 2 3D KeyChain (will only be included in the first run)

MORE INFORMATION

• Self-support (FAQ)
• TBS Tango 2 Manual
• TBS Tango 2 Manual - German
• Lanyard mount 3D print download
• FreedomTX source code
• Tango2 SD Card Contents download
• NEW! BETA! Tango2 SD Card Contents download (2020-04-03)

This transmitter operates on 2S voltage only. 3S X9D packs are not compatible and will damage your transmitter. See battery info below.

The FrSky Taranis X9D Plus 2019 is a re-designed version with additions like an additional momentary button placed on the top left making it ergonomically friendly for DLG pilots to activate launch mode, and features a program scroll wheel making it even easier to navigate the menus. The upgraded MCU is used in conjunction with a re-designed main board that further increases the computing capability and increases the data storage. The upgrades not only improve the running of LUA scripts, it also optimizes overall performance like voice speech outputs.

The 2019 version uses the latest ACCESS communication protocol, it boasts 24 channels with a faster baud rate and lower latency with a high-speed module digital interface. Along with the new spectrum analysis function added to the OpenTX firmware, it is now possible to check the airwaves for RF noise. This version will give you a further improved experience based on the classic Taranis remote control. Additionally, tons of extra upcoming features that ACCESS brings will make this an ideal transmitter for any skill level.

Note: The X, XM, RX, GX series receivers can be gradually upgraded to ACCESS protocol. It includes XM, RXSR, RX4R, RX6R, G-RX6, G-RX8, XM Plus, and R9 series. 

Specifications

• Dimension: 200*194*110mm (L*W*H)
• Weight: 670g (without battery)
• Operating system: OpenTX
• Number of channels: 24 channels
• Internal RF module: ISRM-S-X9
• Operating voltage range: 6.5 - 8.4V (2S ONLY)
• Operating current: 130mA@8.2V (Typ)
• Operating Temperature: -10℃  ~ 60℃  (14℉ ~ 140℉ )
• Backlit LCD resolution: 212*64
• Smart Port, Micro SD card slot and DSC Port
• Mini USB interface: supports 2S Li-battery balancing charge
• Model memories: 60 models (expandable by Micro SD card)
• Compatibility: ACCST D16 and ACCESS receivers

Features

• Classic Taranis form factor design
• Easy launch momentary button
• Program navigation button
• High-speed module digital interface
• Installed with ACCESS protocol
• Supports spectrum analyzer function
• Supports SWR indicator warning
• Supports wired training function
• Haptic vibration alerts and voice speech outputs
• G9D potentiometer gimbal

Includes

• 1 x X9D Plus 2019 Radio Controller
• 1 x Manual
• 1 x Back Strap
• 1 x Sticker

Battery not included.