With the TBS UNIFY PRO32 Nano we have boosted the output power, improved the strength, decreased the power consumption, added capability for insane features and perfected the way it is installed in your multirotor. In a nutshell, it’s the most comprehensive, future proof, highest quality and overall best nano VTx ever made.

MAIN FEATURES

• Smallest, lightest video transmitter on the market
• Up to 500mw+ of output power
• Ultra-clean transmission (up to 16 pilots at once!)
• Barcodes reading
• Easy OSD, FC and RC channel changes, with fallback button menu
• PitMode - power up your quad during a race. Now with team-race capability!
• Clean powerup and video switching
• Robust RF amplifier allows powering up without antenna for hours!
• CE certified

SMARTAUDIO V2.1 & CRSF - TEAM RACE READY

SmartAudio technology provides UART control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. Betaflight OSD, TBS CORE PRO).

With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!

PITMODE - MADE TO RACE

Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's) to allow you to power up your quad and still see the image! You've got less than one meter of range to put your quad through its paces before placing it on that starting grid. Using SmartAudio or CRSF, you can power up the VTx using your remote!

BARCODES? BARCODES!! (PATENT PENDING)

The VTx is capable of processing the camera image. So we taught it to read barcodes! This means the VTx no longer needs to be transmitting to set channels, and setting channels can be done in the pits. It also means no more guesswork what channel the VTx is on, simply point it at the barcode of your choice and it will move to that channel or power level! There are many more exciting features coming with this technology, stay tuned and barcode on!

CLEANSWITCH - NEIGHBOR FRIENDLY

CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly.

SPECIFICATIONS

• Operating Voltage: 3-13V
• Output Power: 14dBm (25mW), 20dBm (100mW), 26dBm (400mW), 28dBm (500+mw)
• Operating Temperature: watch for normal airflow
• Video Input Impedance: 75 Ohm
• Antenna Connector: u.FL socket
• Video Format: NTSC/PAL
• Dimensions: 15 x 13 x 2mm
• Weight: 1g

INCLUDED

• 1x TBS UNIFY PRO32 5G8 Video transmitter
• 1x Silicone cable set (pre-tinned)
• 1x Linear whip antenna
• 1x Shrink Tube

DOWNLOADS

• TBS UNIFY Pro32 Manual
• TBS UNIFY Pro32 Manual (German)
• Declaration of Conformity

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.

The most powerful video transmitter on the market just got a "bigger" brother. It can be connected directly to up to a 6S battery and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand new active output power monitor, we ensure that you'll always meet the race requirements, while giving you the best possible picture. 

At only 7g and a 31x22x6mm form factor, your quad will barely notice it's there. The 25mW - 800mW adjustable output power allows you to race with friends and penetrate significant amounts of concrete with just a few pushes of a button. The 40CH coverage gives you the freedom to fly at any race without having to resort to video transmitter swapping practices (*).

SMARTAUDIO - FULL CONTROL

SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup emergency frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!

CLEANSWITCH - NEIGHBOR FRIENDLY

CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)

PITMODE - MADE TO RACE

Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with Clean Switch you can power on as soon as your channel is available without interrupting any of the active channels. 

SAY NO! TO DIPSWITCHES

Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. 

SPECIFICATIONS

• Operating Voltage: 2S - 6S
• Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*)
• Supply current: up to 600mA
• Weight: 7g (with SMA, without antenna)
• Operating Temperature: watch for normal airflow
• Audio carrier Frequency: 6.5 MHz
• Video Input Impedance: 75 Ohm
• Input Connector: JST GH 7pin (after July 2018)
• Antenna Connector: SMA Female Socket with screw mounting holes
• Video Format: NTSC/PAL

INCLUDED

• TBS UNIFY PRO 5G8 HV Video transmitter
• Video Transmitter / Camera / Power cable

DOWNLOADS

• TBS UNIFY Pro Manual
• TBS UNIFY Pro Manual (German)
• TBS SmartAudio specifications

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.

Overview

Overview

Features an Ultra Low Latency HD digital image transmission, 1080p / 60fps video recording, and eight frequency channels, allowing eight pilots to fly at the same time.

Overview

Overview

Overview

FPV’s favorite “patch killer” antenna has a new upgraded element. The patent pending vector-phasing technology of the Crosshair Xtreme gives both longer range and better signal clarity. Designed to be a long range/obstacle penetration antenna improvements include increased gain, beamwidth, and bandwidth.

Specifications

• Gain: 10.25dbic
• Polariztion: RHCP
• Bandwidth: 5300Mhz-6400MHz
• Axial ratio: 0.99 (measured)
• -3db point: +/- 30 degrees
• Flight beam: 120 degrees
• Weight: 16.6g (0.58oz)
• Dimensions: 7.2cm x 6.2cm x 2.1cm

Includes

• 1x Crosshair XTREME Antenna
• 1x 45 Degree SMA Adapter

The Ion Pro is the latest improvement to the VAS Ion series antennas. This antenna incorporates a more advanced element system for a high axial ratio Omni-directional signal. Not only is the gain the highest of any single CP Omni at a true 2.5dbic offering longer range, but the refined circular pattern of the antenna also allows pilots to operate in the most difficult RF environments, such as urban areas and racecourses. The antenna is designed to be used as both a TX and a RX antenna, the Ion Pro is the perfect choice for professional pilots who need to get their signal where other antennas can’t!

Each antenna is tested not only for SWR but also for radiation pattern and axial ratio during the manufacturing process, to ensure that every antenna performs to the highest standard.

Specifications

• Gain: 2.5dbic
• Axial ratio: 0.95 (measured)

Includes

• 1 x VAS 5.8GHz Ion Pro SMA Antenna (RHCP)

The Lumenier AXII is known to be the highest performing andmost versatile antenna line for FPV today. Lumenier was able to improve on the best and make it even better!

Improved Features

• Significantly Improved Range with a Higher Gain (2.2dBic Gain)
• Much Wider Bandwidth (5.3-6.2GHz)
• Cleaner Signal And Better Rejection to Interference
• More Durable - Improved Injection Molded Housing
• Virtually Perfect Axial Ratio

The AXII 2 comes in many connector types such as SMA, MMCX, U.FL, Stubby SMA, and Long SMA. Precision engineering has given this antenna a virtually perfect 1.0 Axial ratio resulting in a true circularity. On top of that, the AXII 2 has an amazing max gain of 2.2dBic, a true upgrade over the original AXII.

While almost every aspect of the AXII 2 was improved upon, the size and weight managed to stay the same. The AXII 2 is still one of the smallest and most light weight circular polarized antennas on the market, perfect for both lightweight racing builds or freestyle quads.

Super Tough

Antennas take a lot of abuse, especially when put onto a quad. The AXII 2's robust antenna housing is made out of a new injected molded polycarbonate, and ultra-sonically welded shut. This has significantly improved the durability of the AXII housing. The 125mm long semi-rigid RG402 cable allows for 90 degrees or more of freedom. The SMA connection is reinforced with a metal collar crimped to the base for extra support.

Note: When installing, secure the antenna via the SMA connector, do not twist the cap.

Specifications

• Gain: 2.2dbic
• Axial ratio: 1.0 (near perfect)
• Bandwidth: 5.3GHz-6.2GHz
• Radiation Efficiency: 98%
• SWR: <=1.5:1
• Weight: 10.8g
• Size: 125mm x 17.5mm
• Cable: Semi-rigid RG402
• Connector: SMA
• Works great as both a transmitting or receiving antenna
• Compatible with other styles of 5.8GHz RHCP antennas

Polarization

• Right Hand Circular (RHCP)

Includes

• 1x Lumenier AXII 2 Long Range 5.8GHz Antenna (RHCP)

Design by  and manufactured by  Patent Pending.

The next revolution in circular polarization technology, the Triumph Pro gives professional performance in a compact, durable package. Designed by IBCrazy and manufactured by TBS, the multi-phase elements use patent pending technology to create a precise circular pattern that is not distorted by proximity to your aircraft or other objects.

The microstrip antenna design together with a rigid and ultrasonic-welded enclosure allow mounting in exposed places, where signal propagates better. The antenna comes in 4 connector flavors: u.FL, MMCX, MMCX 90º and SMA.

FEATURES:

• Manufactured and tested to highest standards
• Incredibly small and low weight
• Best in class range and signal quality
• Double-jacket semi-rigid cable for heavy impact resistance
• Ultrasonic welded and foam infused cover for ultimate crash-protection

TECHNICAL SPECIFICATIONS:

• Frequency range: 5500-6000MHz
• Gain: 1.6dbic
• Polarization: RHCP
• Weight: 4.4g
• Height: 24mm, 0.95in
• Axial Ratio:   0.99
• Connector: SMA Stubby

PACKAGE CONTENTS:

• 1x TBS Triumph Pro SMA Stubby

The next revolution in circular polarization technology, the Triumph Pro gives professional performance in a compact, durable package.  Don’t let the small size fool you, the Triumph Pro doesn’t compromise on performance.  Designed by IBCrazy and manufactured by TBS, the multi-phase elements use patent pending technology to create a precise circular pattern that is not distorted by proximity to your aircraft or other objects.

The microstrip antenna design together with a rigid and ultrasonic-welded enclosure allow mounting in exposed places, where signal propagates better. The antenna comes in 4 connector flavors: u.FL, MMCX, MMCX 90º and SMA.

FEATURES:

• Best in class range and signal quality
• Manufactured and tested to highest standards
• Ultrasonic welded and foam infused cover for ultimate crash-protection
• Incredibly small and low weight
• Double-jacket semi-rigid cable for heavy impact resistance

TECHNICAL SPECIFICATIONS:

• Frequency range: 5500-6000MHz
• Gain: 1.6dbic
• Polarization: RHCP
• Weight: 11.5g
• Height: 78mm, 3in
• Axial Ratio:   0.99
• Connector: SMA

PACKAGE CONTENTS:

• 1x TBS Triumph Pro SMA