ATTENTION!

UPDATE YOUR CROSSFIRE TRANSMITTER TO V2.88 OR ABOVE BEFORE BINDING!

TBS has redefined long range flying! With the TBS Crossfire Diversity Nano RX we have taken the most powerful Crossfire receiver. Presenting the smallest full-fledged diversity receiver of any frequency, even boasting a power-redundancy circuit (battery not included!)

TRUE DIVERSITY, FULL RANGE

The TBS CROSSFIRE Diversity Nano Receiver is a compact R/C receiver with 8ch outputs (PPM, SBUS, and CRSF capable), with best-in-industry noise-rejection and record-breaking range capability. It is the only receiver to provide a true dual-input stage, chip-based diversity, with the usual filtering and noise rejection from onboard video systems.

BEACON MODE

Ever lost a plane and spent hours looking for it? Enter the TBS CROSSFIRE beacon mode. The diversity nano receiver comes with a LiPo battery port where you can connect an optional backup port (1s). It will keep the receiver running for a full day after all onboard electronics are gone. It will be screaming for help by giving you its GPS coordinates, and also blasting out RF beacon signals that will allow you to pinpoint its location even if no GPS was ever on your airplane. The backup battery (1s) will also be charged as soon as you apply power to the rig. 

INCLUDES

• 1x TBS Crossfire Diversity Nano Receiver
• 2x TBS Crossfire Micro Receiver Antenna
• 14x 30awg silicon connection wires
• 1x Spare shrink tube

SPECIFICATIONS

• Weight: 1.8g (receiver only)
• Size: 24mm x 18mm
• Requires: Firmware V2.87

DOWNLOADS

• TBS Crossfire - RED Declaration of Conformity
• Quickstart Guide / Manual

THE TBS IMMORTAL T V2 ANTENNA!

With improved signal sensitivity and durability, the Immortal T v2 antenna is the perfect companion for race quads.

The center housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize damage from crashes.  The spring steel element still carries the same immortality from V1 which will protect itself from prop strikes and incorrect mounting. Further tuning on the center element provides better coverage and range. 

• Weight: 3.4g
• Width: 15cm
• Connector: u.FL / IPX
• Cable length: ~80mm

THE EXTENDED TBS IMMORTAL T V2 ANTENNA!

With improved signal sensitivity and durability, the extended Immortal T antenna is the perfect companion for long range pilots.

The center housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize damage from crashes.  The spring steel element still carries the same immortality from V1 which will protect itself from prop strikes and incorrect mounting. Further tuning on the center element provides better coverage and range. The extended version has a 120mm long cable, ideal for larger aircraft like the TBS Caipirinha 2, or for long range rigs which require additional clearance!

SPECIFICATIONS

• Weight: 3.7g
• Width: 15cm
• Connector: u.FL / IPX
• Cable length: 120mm

A NEW ERA OF CONNECTIVITY

The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diveristy, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link.

Remote control links, however, are tasked with much more than range. Latency, telemetry, robustness against interference, ease of use and the overall finish are too often sacrificed for that last bit of range. The Crossfire comes with plenty of range, and uses that margin for additional functionality and reliability. A bright future for FPV lies ahead!

TELEMETRY / CRSF

As a modern R/C link, it has telemetry built in. Two-way communication opens up new possibilities. From streaming MAVLink to you smart device (no Mavlink stream support for Crossfire Micro TX!), to updating your firmware, setting your video transmitter channel or adjusting flight control parameters such as PIDs. Adaptive bandwidth controls the speed of transmission or optimizes for ultimate range. CRSF is a proprietary TBS communication protocol between the Crossfire and R/C and Flight Control. It provides ultra-low latency with unbelievable bandwidth (3x faster, 6x more data than any comparable protocol!). With such tight integration, the TBS Crossfire is the logical choice for anyone flying Betaflight, KiSS or ArduPilot/Pixhawk platforms.

BOILED DOWN TO SIMPLICITY

The Crossfire Micro TX borrows the core technology from its larger brother, but is a JR-module transmitter simplified to the most sought-after features, at an incredible price! For people looking to do extreme long range flights beyond 15-20km, the Crossfire TX is still the way to go. For anyone looking to penetrate buildings, fly mini quads or just explore your surroundings a few kilometers away, the Micro TX is the perfect companion. It will still go out up to 40km, just like its bigger brother. But it costs less than half the price.  

DOWNLOADS

• TBS Crossfire Manual
• TBS Crossfire Manual (German)
• TBS Crossfire Micro TX Quickstart Guide
• TBS Agent X (for software updates)
• Latest OpenTX LUA Scripts for Crossfire

FEATURES:

• Long range, adaptive and robust remote control system for your aircraft
• Immune to on-board noise
• Self-healing & frequency hopping (DSSS, FHSS)
• Two-way communication link with real-time link vitals and telemetry
• RX beacon mode to recover your downed aircraft
• Adaptive bandwidth control and range optimization
• Low latency, 150Hz update rate (3x faster than typical RC links) control for perfect immersive feeling
• Super easy binding and configuration via built-in display of your R/C
• 8 or 12ch output via SBUS/PPM/CRSF on both receivers
• Two receiver models: 8 port Diversity Rx, 4 port Mini-receiver (4g weight!)
• Selectable RF power from 25mW to 250mW (local restrictions apply)
• Ability to fly with multiple friends at the same time (10 or more)
• Micro-receiver for smaller drones. Smaller than you think!
• Transmitter LED shows link health
• Software updates via RF Link

TECHNICAL SPECIFICATIONS:

• Input Voltage: 3.5 - 13V
• Power consumption: 1.1W (@10mW) - 2W (@100mW)
• Dimensions: 65 x 48 x 22 mm (JR module size)
• Weight: 48g
• Frequency Bands: 868MHz (EU, Russia) / 915MHz (USA, Asia, Australia)

PACKAGE INCLUDES

• TBS Crossfire Micro Transmitter (JR module)
• TBS Crossfire Stock Tx Antenna V2

TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case, the minimum!). The end result is a full range receiver, at the smallest size of any receiver in the industry (yes, it's smaller than the XM+). 

SPECIFICATIONS

• Weight: 0.5g (receiver only)
• Size: 11mm x 18mm
• Requires: Firmware V2.25

INCLUDES

• 1x TBS Crossfire Nano Receiver
• 1x TBS Crossfire Micro Receiver Antenna
• 1x Spare shrink tube
• 6x 30awg silicon connection wires (2 black, 2 red, 1 white, 1 yellow)
• 1 x pin header 1x4

DOWNLOADS

• TBS Crossfire - RED Declaration of Conformity
• Quickstart Guide / Manual

A NEW ERA OF CONNECTIVITY

The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diveristy, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link.

Remote control links, however, are tasked with much more than range. Latency, telemetry, strength against interference, connectivity with smart devices, ease of use and the overall finish are too often sacrificed for that last bit of range. The Crossfire comes with plenty of range, and uses that margin for additional functionality and reliability. A bright future for FPV lies ahead!

DEVELOPED BY EXPERTS

Team BlackSheep has been notorious for long range records, close-to-ground proximity flying in the Alps and deep urban operations. During our numerous missions all around the globe we have gathered a list of requirements, and have found that no existing system can cover them all. So we set on a long and painful path to develop a RC link system entirely from scratch, put it through its paces for over a year to ensure top-notch reliability and state-of-the-art functionality.

Through the OLED Display on the transmitter, you can monitor the real-time location of your drone (TBS GPS or BlackBox with DJI Naza or APM-based GPS required).  The up and downlink status provide a feeling of safety, the configuration options through the OLED display do away with any PC-based configuration tools. The pulsing LED relays your link budget and link health in colorized form (green = keep going, orange = turn around). In case of a crash, the location of the drone is visible on the OLED as well. The built in battery on the receiver turns it into a beacon automatically - and it will continue to transmit its last known location until the battery runs out. 

TELEMETRY / CRSF

As a modern R/C link, it has telemetry built in. Two way communication opens up new possibilities. From streaming MAVLink to you smart device, to updating your firmware, setting your video transmitter channel or adjusting flight control parameters such as PIDs. Adaptive bandwidth controls the speed of transmission or optimizes for ultimate range. CRSF is a proprietary TBS communication protocol between the Crossfire and R/C and Flight Control. It provides ultra-low latency with incredible bandwidth (3x faster, 6x more data than any comparable protocol!). With such tight integration, the TBS Crossfire is the logical choice for anyone flying Betaflight, KiSS or ArduPilot/Pixhawk platforms. 

DOWNLOADS

• TBS Crossfire Manual
• TBS Crossfire Manual (German)
• TBS Agent X (for software updates)
• Latest OpenTX LUA Scripts for Crossfire

FEATURES:

• Long range, adaptive and robust remote control system for your aircraft
• Immune to on-board noise
• Two-way communication link with real-time link vitals and telemetry
• Adaptive bandwidth control and range optimization
• Self-healing & frequency hopping (DSSS, FHSS)
• RX beacon mode to recover your downed aircraft
• Serial Modem capable of transmitting MAVLink or other serial protocols (up & downlink)
• Low latency, 150Hz update rate (3x faster than typical RC links) control for perfect immersive feeling
• Super easy binding and configuration via built-in display
• 8 or 12ch output via PPM/SBUS/CRSF on both receivers
• Two receiver models: 8ch Diversity Rx, 4ch PPM/SBUS Mini-receiver (4g weight!)
• Selectable RF power from 10mW to 2W (local restrictions apply)
• Ability to fly with multiple friends at the same time (10 or more)
• Transmitter LED shows link health, OLED display for built in configuration
• Dedicated head-tracking input option for full FPV immersion
• Fully configurable by OpenTX and TBS TANGO remote using CRSF protocol
• Short-Range mobile connectivity telemetry output for smartphone apps
•  Expansion port for future feature support
• CRSF protocol interface to Betaflight, Kiss and Raceflight FCs ( lower latency, higher update rate, telemetry support ) 
• Software updates via RF Link
• Micro-receiver for smaller drones. Smaller than you think!

TECHNICAL SPECIFICATIONS:

• Input Voltage: 3.5 - 13V
• Power consumption: 1.1W (@10mW) - 3.2W (@2000mW)
• Dimensions: 55 x 89 x 15 mm
• Weight: 76g
• Frequency Bands: 868MHz (EU, Russia) / 915MHz (USA, Asia, Australia)

PACKAGE INCLUDES

• TBS Crossfire Transmitter
• TBS Crossfire JR Adapter
• TBS Crossfire Stock Tx Antenna V2
• Crossfire Futaba cable
• Crossfire Graupner / Spektrum cable
• Crossfire PWM Pigtail
• Crossfire JST to XT30 cable

THE CROSSFIRE TX ANTENNA TO RULE THEM ALL!

Antenna orientation, wear & tear and non-directionality have been the source of some range issues with our long range and miniquad pilots. We therefore sat down with IBCrazy and he designed this antenna to be as durable as possible. A diamond lasts forever!

MORE RANGE

With a slight directionality to give you more range when flying in front of you, but still maintain a solid link when flying behind you. The antenna uses the ground you are standing on to reflect and therefore boost your signal out beyond what traditional antennas can manage. 

SPECIFICATIONS:

• Gain: 2.88dB
• Frequency: 850 - 950MHz
• Connector: SMA Male
• Weight: 20.6g
• Size: 135 x 120 mm
• Suggested for: TBS Crossfire TX or TBS Crossfire Micro TX

Designed by and manufactured in cooperation with Video Aerial Systems, IBCrazy. 

REDEFINING THE REMOTE CONTROL

Team Black Sheep has been at the forefront of perfecting the interface between FPV drone and mind. The TBS Tango 2 changes how radio remote controls will be from here on out! Despite being the smallest remote control available, it comes with full size hall gimbals, full-featured FreedomTX (temporary OpenTX fork), the lowest end-to-end latency of any remote and transmission system, unbreakable 3 & 2 position switches, open source operating system, built-in battery, USB-C charging, and so much more! It's not just a retouched game controller, it was designed from the ground up for R/C! The form factor and features make it the ideal take-anywhere, fly anytime remote control. 

CROSSFIRE INSIDE

The first radio with TBS Crossfire built in. This significantly lowers your cost, increases reliability and minimizes set up time. And the cherry on top are the LUA scripts being part of the familiar user interface. The antenna swivels out of the way, or doubles as a kick-stand when resting. TBS Cloud ready to go from the start. It all just makes sense. 

FEATURES

• Full size hall sensor gimbals
• Ergonomic and compact design with comfy rubber grips
• Ball-bearing
  
  • Configurable resistance and tension
  • Spare spring set included for lower tension
  • Foldable gimbal sticks (Pro only)
  • Adjustable throttle & pitch throw (+/- 10 degrees)
• Robust, streamlined switches
  
  • 2x 2-position switches
  • 2x 3-position switches
  • 2x momentary buttons
• TBS Crossfire built-in
  
  • CRSFShot for lowest latency and most direct response of any remote control available
  • Range of up to 30km / 20mi from the palm of your hand
  • Up to 12 channels supported
  • Swivel-antenna that doubles as a kick-stand
• Built-in 5000mAh 1S LiPo with USB-C 2A charging (2.5 hours for full charge)
• Open Source remote control operating system (FreedomTX, temporary fork of OpenTX)
• Speech audio output with audio jack & haptic vibration alert
• High resolution (128*96) black & white OLED screen w/ backlight
• Rocker dial and 3 button menu for super simple navigation
• 100+ model memory with included SD-card
• Digital rocker dial trim
• TBS Cloud compatible

TBS TANGO 2 PRO INCLUDES

• 1 x Tango 2 Pro
• 1 x Velvet Carry Bag with TBS Logo
• 1 x Springs Set (Lower Tension)
• 2 x Throttle limitation screws (with allen key)
• 1 x Sticker Sheet
• 1 x Tango 2 3D KeyChain (will only be included in the first run)

MORE INFORMATION

• Self-support (FAQ)
• TBS Tango 2 Manual
• TBS Tango 2 Manual - German
• Lanyard mount 3D print download
• FreedomTX source code
• Tango2 SD Card Contents download
• NEW! BETA! Tango2 SD Card Contents download (2020-04-03)

The most powerful video transmitter on the market just got a "bigger" brother. It can be connected directly to up to a 6S battery and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand new active output power monitor, we ensure that you'll always meet the race requirements, while giving you the best possible picture. 

At only 7g and a 31x22x6mm form factor, your quad will barely notice it's there. The 25mW - 800mW adjustable output power allows you to race with friends and penetrate significant amounts of concrete with just a few pushes of a button. The 40CH coverage gives you the freedom to fly at any race without having to resort to video transmitter swapping practices (*).

SMARTAUDIO - FULL CONTROL

SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup emergency frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!

CLEANSWITCH - NEIGHBOR FRIENDLY

CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)

PITMODE - MADE TO RACE

Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with Clean Switch you can power on as soon as your channel is available without interrupting any of the active channels. 

SAY NO! TO DIPSWITCHES

Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. 

SPECIFICATIONS

• Operating Voltage: 2S - 6S
• Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*)
• Supply current: up to 600mA
• Weight: 7g (with SMA, without antenna)
• Operating Temperature: watch for normal airflow
• Audio carrier Frequency: 6.5 MHz
• Video Input Impedance: 75 Ohm
• Input Connector: JST GH 7pin (after July 2018)
• Antenna Connector: SMA Female Socket with screw mounting holes
• Video Format: NTSC/PAL

INCLUDED

• TBS UNIFY PRO 5G8 HV Video transmitter
• Video Transmitter / Camera / Power cable

DOWNLOADS

• TBS UNIFY Pro Manual
• TBS UNIFY Pro Manual (German)
• TBS SmartAudio specifications

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.

With the TBS UNIFY PRO32 Nano we have boosted the output power, improved the strength, decreased the power consumption, added capability for insane features and perfected the way it is installed in your multirotor. In a nutshell, it’s the most comprehensive, future proof, highest quality and overall best nano VTx ever made.

MAIN FEATURES

• Smallest, lightest video transmitter on the market
• Up to 500mw+ of output power
• Ultra-clean transmission (up to 16 pilots at once!)
• Barcodes reading
• Easy OSD, FC and RC channel changes, with fallback button menu
• PitMode - power up your quad during a race. Now with team-race capability!
• Clean powerup and video switching
• Robust RF amplifier allows powering up without antenna for hours!
• CE certified

SMARTAUDIO V2.1 & CRSF - TEAM RACE READY

SmartAudio technology provides UART control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. Betaflight OSD, TBS CORE PRO).

With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!

PITMODE - MADE TO RACE

Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's) to allow you to power up your quad and still see the image! You've got less than one meter of range to put your quad through its paces before placing it on that starting grid. Using SmartAudio or CRSF, you can power up the VTx using your remote!

BARCODES? BARCODES!! (PATENT PENDING)

The VTx is capable of processing the camera image. So we taught it to read barcodes! This means the VTx no longer needs to be transmitting to set channels, and setting channels can be done in the pits. It also means no more guesswork what channel the VTx is on, simply point it at the barcode of your choice and it will move to that channel or power level! There are many more exciting features coming with this technology, stay tuned and barcode on!

CLEANSWITCH - NEIGHBOR FRIENDLY

CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly.

SPECIFICATIONS

• Operating Voltage: 3-13V
• Output Power: 14dBm (25mW), 20dBm (100mW), 26dBm (400mW), 28dBm (500+mw)
• Operating Temperature: watch for normal airflow
• Video Input Impedance: 75 Ohm
• Antenna Connector: u.FL socket
• Video Format: NTSC/PAL
• Dimensions: 15 x 13 x 2mm
• Weight: 1g

INCLUDED

• 1x TBS UNIFY PRO32 5G8 Video transmitter
• 1x Silicone cable set (pre-tinned)
• 1x Linear whip antenna
• 1x Shrink Tube

DOWNLOADS

• TBS UNIFY Pro32 Manual
• TBS UNIFY Pro32 Manual (German)
• Declaration of Conformity

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.

The next revolution in circular polarization technology, the Triumph Pro gives professional performance in a compact, durable package.  Don’t let the small size fool you, the Triumph Pro doesn’t compromise on performance.  Designed by IBCrazy and manufactured by TBS, the multi-phase elements use patent pending technology to create a precise circular pattern that is not distorted by proximity to your aircraft or other objects.

The microstrip antenna design together with a rigid and ultrasonic-welded enclosure allow mounting in exposed places, where signal propagates better. The antenna comes in 4 connector flavors: u.FL, MMCX, MMCX 90º and SMA.

FEATURES:

• Best in class range and signal quality
• Manufactured and tested to highest standards
• Ultrasonic welded and foam infused cover for ultimate crash-protection
• Incredibly small and low weight
• Double-jacket semi-rigid cable for heavy impact resistance

TECHNICAL SPECIFICATIONS:

• Frequency range: 5500-6000MHz
• Gain: 1.6dbic
• Polarization: RHCP
• Weight: 11.5g
• Height: 78mm, 3in
• Axial Ratio:   0.99
• Connector: SMA

PACKAGE CONTENTS:

• 1x TBS Triumph Pro SMA

The next revolution in circular polarization technology, the Triumph Pro gives professional performance in a compact, durable package. Designed by IBCrazy and manufactured by TBS, the multi-phase elements use patent pending technology to create a precise circular pattern that is not distorted by proximity to your aircraft or other objects.

The microstrip antenna design together with a rigid and ultrasonic-welded enclosure allow mounting in exposed places, where signal propagates better. The antenna comes in 4 connector flavors: u.FL, MMCX, MMCX 90º and SMA.

FEATURES:

• Manufactured and tested to highest standards
• Incredibly small and low weight
• Best in class range and signal quality
• Double-jacket semi-rigid cable for heavy impact resistance
• Ultrasonic welded and foam infused cover for ultimate crash-protection

TECHNICAL SPECIFICATIONS:

• Frequency range: 5500-6000MHz
• Gain: 1.6dbic
• Polarization: RHCP
• Weight: 4.4g
• Height: 24mm, 0.95in
• Axial Ratio:   0.99
• Connector: SMA Stubby

PACKAGE CONTENTS:

• 1x TBS Triumph Pro SMA Stubby